贯筋藤凝乳剂对小鼠急性毒性与遗传毒性研究

目的探究贯筋藤作为凝乳剂的安全性。方法以贯筋藤凝乳剂为受试物,采用限量法评价贯筋藤凝乳剂对小鼠的急性毒性,观察小鼠体重及解剖后心脏、脾脏、肝脏、肾脏是否发生病变;采用Ames实验评价其遗传毒性,设20、100、500、2500、12500μg/皿剂量组进行遗传毒性实验。结果急性毒性实验未出现小鼠死亡情况。研究发现小鼠的精神亢奋,有较强攻击欲望,根据小鼠的生理状况对小鼠进行脑组织中MAO-A和5-HT含量检测发现空白组和实验组差异极显著(P0.01)。通过Ames试验检测贯筋藤凝乳剂的遗传毒性,根据结果发现在12500μg/皿的情况下出现抑制微生物生长的情况,而在2500μg/皿的剂量下统计每组菌落数差异不著性(P0.05)。结论贯筋藤凝乳剂的LD50剂量大于10000 mg/kg,并根据Ames试验确定贯筋藤凝乳剂在最高2500μg/皿不具有致突变作用。     

氮含量对HPD-1双相不锈钢组织及力学性能的影响

通过显微组织观察与力学性能测试研究了氮含量(0.08%~0.22％,质量分数)对HPD-1双相不锈钢硬度、拉伸性能、低温冲击性能及疲劳性能的影响。结果表明,氮含量变化可显著影响试验钢γ/α相比例,当氮含量由0.08％升高到0.22％,γ相含量由38.1％提高至56.5％。α相的硬度由273 HV10提高到343 HV10,γ相的硬度由238 HV10提高到299 HV10,试验钢强度明显提升。氮元素对两相比例和奥氏体相韧性的双重影响导致试验钢低温冲击性能呈先上升后下降的趋势;更高的氮含量抑制疲劳裂纹萌生与拓展,是影响HPD-1双相不锈钢室温疲劳性能的主要因素。撕裂棱是疲劳断口的显著特征。     

Early-warning performance monitoring system (EPMS) using the business information of a project

An early-warning performance monitoring system (EPMS) is proposed to objectively measure and monitor the performance of a project for early detection of inherent poor performance problems. The EPMS is built based on project progress data and consists of a database of business information, an optimized theoretical model used as a performance measurement baseline, and an index for monitoring and forecasting the performance. By monitoring the performance through an application of the EPMS to the Korean construction project, the quarterly variation of index was found to differ by project type. These results could explain the environmental changes in the project execution. Therefore, the EPMS is expected to be an alternative for objective performance monitoring and forecasting while applying the existing methods is difficult because of the limited available data on performance indicators. The development procedures may also be useful to researchers interested in approaches to quantitatively analyze trends in various industries.     

Deep Neural Networks for Determining the Parameters of Buildings from Single-Shot Satellite Imagery

Journal of Computer and Systems Sciences International - The height of a building is a basic characteristic needed for analytical services. It can be used to evaluate the population and functional...     

Tuning Parameter Selection Based on Blocked $$3\times 2$$3×2 Cross-Validation for High-Dimensional Linear Regression Model

Neural Processing Letters - In high-dimensional linear regression, selecting an appropriate tuning parameter is essential for the penalized linear models. From the perspective of the expected...     

Subspace-based multitask learning framework for hyperspectral imagery classification

Multimedia Tools and Applications - Subspace-based models have been widely applied for hyperspectral imagery applications, especially for classification. The main principle of these methods is...     

空冷器用高压水清洗与雾化降温系统集成设计与开发

高压水清洗系统和喷淋降温系统分别是春季保持空冷器翅片表面清洁和夏季保证空冷器在高温下正常运行的2个重要辅助系统。针对喷淋系统的缺点研究了高压射流雾化技术,通过试验论证了高压水清洗与雾化降温系统集成的可行性和合理性。根据设计思路开发的集成系统已在山西某项目获得应用并取得了良好的使用效果,此高压水清洗与雾化降温集成系统中高压水发生装置及介质输送管路共用,产生的高压水射流雾化颗粒可达到60μm,夏季降温效果较传统喷淋降温效果大幅提升,水资源的利用率得到极大提高,系统性价比更高。     

热轧带钢卷取机夹送辊修复材料与再制造工艺研究

为了提高热轧带钢卷取机夹送辊表面的修复质量，通过正交试验优选出埋弧堆焊专用焊丝ZJ－11和ZJ－12，过渡层选用ZJ－11药芯焊丝，堆焊硬层选用ZJ－12药芯焊丝，采用优选出的焊丝进行了堆焊修复试验。试验结果显示，堆焊焊缝金相组织中的马氏体更加细化，且碳化物颗粒明显增加，材料的硬度与耐磨性显著提升。研究表明，通过采用合理的再制造工艺对热轧带钢卷取机夹送辊进行修复，修复后满足要求，使用效果良好，显著提高了夹送辊的使用寿命。